Home | Products | Analytical | Conductivity
Conductivity
140, 141, 142 |
Retractable design allows sensor to be removed from a pipe or vessel without shutting down the process. Insertion-type sensor screws into process piping All installation hardware included 316 stainless steel and peek construction allow operation to 392of (200oc) Available with 0.2 and 1.0/cm cell constants |
Download | |
150 |
- Ideal for use as a set point detector where accuracy over a broad range of conductivity is not needed - Suitable for insertion or submersion applications - Available with 0.1, 0.5 and 1.0/cm cell constants |
Download | |
400 |
- Screw-in process connection - Rugged construction: titanium electrodes with 316 stainless steel fitting and peek insulator. - Initial calibration not required. Pre-determined cell constant ensures out-of-the-box accuracy. - Cell constants 0.01, 0.10, and 1.0/cm cover broad range of conductivity - High temperature (392o200oc)) option available - Available with variopol (vp) quick disconnect fitting. |
Download | |
402 |
- Retractable sensor can be removed from process piping without shutting down and draining the line. - Rugged construction: titanium electrodes with 316 stainless steel insertion tube and peek insulator. -Initial calibration not required. Pre-determined cell constant ensures out-of-the-box accuracy. - Cell constants 0.01, 0.10. 1.0/cm, and 10/cm cover a broad range of conductivity - Maximum temperature 212of (100oc) - Available with variopol (vp) quick disconnect fitting. |
Download | |
404 |
- Sensor and flow cell combined in a single body - Fast response to changes in conductivity and temperature - Initial calibration not required. Pre-determined cell constant ensures out-of-the-box accuracy. - Cell constants: 0.01, 0.10/cm |
Download | |
225 |
Non-contacting sensor resists corrosion and fouling 2-inch tri-clamp® process connection 3a sanitary option available USP class VI option available |
Download | |
245 |
- Flow through design is ideal for applications where protrusion of the sensor into the piping is undesirable. - Available in four line sizes with tri-clamp® fittings. - Wetted plastics and elastomers compliant with 21cfr177 |
Download | |
403 |
- Contacting sensor designed to meet usp requirements for water for injection. - Pre-calibrated sensors with 0.01. 0.1, and 1.0/cm cell constants - All wetted plastics and elastomers are compliant with 21cfr177. - All wetted surfaces have 0.4 micrometre ra finish. - Available with variopol (vp) quick disconnect fitting. |
Download | |
410VP |
- Four-electrode design provides exceptional linearity between 1 us/cm and 1400 ms/cm - Pre-determined cell constant for maximum accuracy - Available in a variety of sanitary process fittings - Sensor body and elastomers are compliant with 21cfr177. |
Download | |
222 |
- Flow-through design is ideal for use with viscous or fibrous liquids - Fits 1-inch or 2-inch lines using 150 or 300 lb flanges - Teflon pipe liner resists corrosion - Maximum temperature 360f (182c) |
Download | |
226 |
- Peek body resists corrosion - Large toroid opening resists plugging, making the sensor ideal for viscous or fibrous liquids - Maximum temperature 248f (120c) |
Download | |
228 |
General purpose sensor for use in dirty, corrosive, or high conductivity liquids Use with screw-in or retractable installation options Moulded from corrosion-resistant peek or tefzel® High temperature (392°f (200°c)) option available |
Download | |
242 |
- Flow-through design is ideal for use with viscous or fibrous liquids - Fits 1-inch (dn 25) through 4-inch (dn 100) line sizes - Replaceable liner in peek, ptfe, or alumina reduces operating costs - Alumina liner allows use with abrasive, high temperature liquids |
Download |