Conductivity

     
140, 141, 142 Retractable design allows sensor to be removed from a pipe or vessel without shutting down the process.
Insertion-type sensor screws into process piping
All installation hardware included
316 stainless steel and peek construction allow operation to 392of (200oc)
Available with 0.2 and 1.0/cm cell constants

Product Enquiry

Download
150 - Ideal for use as a set point detector where accuracy over a broad range of conductivity is not needed
- Suitable for insertion or submersion applications
- Available with 0.1, 0.5 and 1.0/cm cell constants

Product Enquiry

Download
400 - Screw-in process connection
- Rugged construction: titanium electrodes with 316 stainless steel fitting and peek insulator.
- Initial calibration not required. Pre-determined cell constant ensures out-of-the-box accuracy.
- Cell constants 0.01, 0.10, and 1.0/cm cover broad range of conductivity
- High temperature (392o200oc)) option available
- Available with variopol (vp) quick disconnect fitting.

Product Enquiry

Download
402 - Retractable sensor can be removed from process piping without shutting down and draining the line.
- Rugged construction: titanium electrodes with 316 stainless steel insertion tube and peek insulator.
-Initial calibration not required. Pre-determined cell constant ensures out-of-the-box accuracy.
- Cell constants 0.01, 0.10. 1.0/cm, and 10/cm cover a broad range of conductivity
- Maximum temperature 212of (100oc)
- Available with variopol (vp) quick disconnect fitting.

Product Enquiry

Download
404 - Sensor and flow cell combined in a single body
- Fast response to changes in conductivity and temperature
- Initial calibration not required. Pre-determined cell constant ensures out-of-the-box accuracy.
- Cell constants: 0.01, 0.10/cm

Product Enquiry

Download
225 Non-contacting sensor resists corrosion and fouling
2-inch tri-clamp® process connection
3a sanitary option available
USP class VI option available

Product Enquiry

Download
245 - Flow through design is ideal for applications where protrusion of the sensor into the piping is undesirable.
- Available in four line sizes with tri-clamp® fittings.
- Wetted plastics and elastomers compliant with 21cfr177

Product Enquiry

Download
403 - Contacting sensor designed to meet usp requirements for water for injection.
- Pre-calibrated sensors with 0.01. 0.1, and 1.0/cm cell constants
- All wetted plastics and elastomers are compliant with 21cfr177.
- All wetted surfaces have 0.4 micrometre ra finish.
- Available with variopol (vp) quick disconnect fitting.

Product Enquiry

Download
410VP - Four-electrode design provides exceptional linearity between 1 us/cm and 1400 ms/cm
- Pre-determined cell constant for maximum accuracy
- Available in a variety of sanitary process fittings
- Sensor body and elastomers are compliant with 21cfr177.

Product Enquiry

Download
222 - Flow-through design is ideal for use with viscous or fibrous liquids
- Fits 1-inch or 2-inch lines using 150 or 300 lb flanges
- Teflon pipe liner resists corrosion
- Maximum temperature 360f (182c)

Product Enquiry

Download
226 - Peek body resists corrosion
- Large toroid opening resists plugging, making the sensor ideal for viscous or fibrous liquids
- Maximum temperature 248f (120c)

Product Enquiry

Download
228 General purpose sensor for use in dirty, corrosive, or high conductivity liquids
Use with screw-in or retractable installation options
Moulded from corrosion-resistant peek or tefzel®
High temperature (392°f (200°c)) option available

Product Enquiry

Download
242 - Flow-through design is ideal for use with viscous or fibrous liquids
- Fits 1-inch (dn 25) through 4-inch (dn 100) line sizes
- Replaceable liner in peek, ptfe, or alumina reduces operating costs
- Alumina liner allows use with abrasive, high temperature liquids

Product Enquiry

Download
X