Dissolved Oxygen and Ozone Sensors
| 499ADO |
- EASILY REPLACEABLE MEMBRANE, no special tools required. - AUTOMATIC AIR CALIBRATION - AUTOMATIC COMPENSATION FOR CHANGES IN MEMBRANE PERMEABILITY - PRESSURE EQUALIZATION maintains correct membrane tension in pressurized samples. - VARIOPOL CONNECTOR OPTION allows the sensor to be replaced without running new cable. |
 |
Download |
| 499AOZ |
- MOLDED FROM OZONE-RESISTANT POLYSULFONE - EASILY REPLACEABLE MEMBRANE, no special tools required. - PRESSURE EQUALIZATION maintains correct membrane tension in pressurized samples. - AUTOMATIC COMPENSATION FOR CHANGES IN MEMBRANE PERMEABILITY - VARIOPOL CONNECTOR OPTION allows the sensor to be replaced without running new cable. |
 |
Download |
| 499ATrDO |
- HIGH ACCURACY: + ppb error below 20 ppb - RAPID STABILIZATION following calibration or maintenance. - EASILY REPLACEABLE MEMBRANE, no special tools required. - AUTOMATIC COMPENSATION FOR CHANGES IN MEMBRANE PERMEABILITY - VARIOPOL CONNECTOR OPTION allows the sensor to be replaced without running new cable. |
 |
Download |
| Bx438 |
- DESIGNED FOR CARBONATED BEVERAGES. Minimal interference from carbon dioxide. - TOLERATES REPEATED CIP CYCLES - SENSOR RESPONSE PRACTICALLY INDEPENDENT OF FLOW - FAST RESPONSE TIME |
 |
Download |
| Gx448 |
- AVAILABLE IN THREE LENGTHS between 100 and 300 mm - G 1 1/4 PROCESS CONNECTION - TOLERATES REPEATED STEAM STERILIZATION - SENSOR RESPONSE PRACTICALLY INDEPENDENT OF FLOW - FAST RESPONSE TIME |
 |
Download |
| Hx438 |
- AVAILABLE IN FOUR LENGTHS between 120 and 425 mm - PG 13.5 PROCESS CONNECTION - TOLERATES REPEATED STEAM STERILIZATION - SENSOR RESPONSE PRACTICALLY INDEPENDENT OF FLOW - FAST RESPONSE TIME |
 |
Download |
| RDO |
The RDO® sensor and analyzer is intended for the determination of dissolved oxygen in water. It is ideal for use in wastewater aeration basins and ponds. The sensor can be calibrated either against a referee instrument or in water-saturated air. Air calibration is completely automatic. - SINGLE OR DUAL INPUT ANALYZER - OXYGEN SENSOR uses the fluorescence quenching method - ACCURATE READINGS: ±0.1 ppm between 0.0 and 8.0 ppm |
 |
Download |
| Oxygen Sensor Mounting Accessories |
The BB-11 Floating Ball System and the HRMS HandRail Mounting Systems can be used with both the Dissolved Oxygen Sensor Model 499ADO and the Model RDO. - The BB-11 Floating Ball System maintains constant sensor depth and supports sensor weight with reserve capacity. - The HRMS HandRail Mounting System is a complete mounting system with versatile attachment options. |
 |
Download |
Enquire